The connection method for the servo pulse and direction receiver is actually not complicated.
Simply put, we only need to determine the appropriate wiring method and matching resistor based on the signal type provided by the host computer, so as to achieve reliable switching on and off of the optocoupler.
However, many people still encounter difficulties in actual operation. In response, our technical staff has provided specific pulse port wiring methods for Zhishan servos, hoping to help you use our products more conveniently.
Overview
01
NPN wiring method ( 24V/12V/5V input type)
Applicable to K , K1 , K1AD servos
02
PNP wiring method ( 24V/12V/5V input type)
Applicable to K , K1 , K1AD servos
03
Differential wiring method ( 5V input type)
Applicable to K , K1 , K1AD servos
04
NPN wiring method ( 24V/12V input type)
Applicable to GA , G1 , and G2 servos
05
NPN wiring method ( 5V input type)
Applicable to GA , G1 , and G2 servos
06
PNP wiring method ( 24V/12V input type)
Applicable to GA , G1 , and G2 servos
07
PNP wiring method ( 5V input type)
Applicable to GA , G1 , and G2 servos
08
Differential wiring method ( 5V input type)
Applicable to GA , G1 , and G2 servos
That concludes this learning material – the wiring method for the Zhishan servo pulse interface.
If you have any other learning needs, please let us know in the comments section. We will inform our technical staff as soon as possible to make arrangements for you.
