The DMC110A controller's instruction settings are reasonable and simple, conforming to people's thinking habits, and will not spend too much of your valuable time learning the instructions; the controller provides an independent programming environment, allowing you to modify or rewrite the program at any time.
Controls single-axis stepper motors. The DMC110A controller drives single-axis stepper motors and features two hardware limit points; it can control ordinary stepper motors at speeds up to 5000 rpm , breaking through the traditional concept of low-speed stepper motors; it has an ideal trapezoidal acceleration curve, achieving smooth and rapid start and stop with zero positioning error;
The DMC110A controller features a 128×64 dot matrix LCD screen , and the displayed content can be downloaded to a computer at any time via the controller's built-in RS232 interface. The display mode is flexibly programmable and easy to use. It has 16 universal inputs and 8 outputs, providing powerful logic control functions.
In addition to a complete set of stepper motor control ports, the DMC110A controller has 16 general-purpose input points (including two limit points, one run point, and one stop point) and 8 general-purpose output points. Its functions are fully customizable, helping you to achieve any simple or complex logic and point control.
Supports both manual instruction code programming and computer programming download. The DMC110A controller supports two programming modes: manual programming has a user-friendly interface and is easy to operate; computer programming has separate compilation software that can automatically find errors and is simple to use.
Features :
1. Suitable for various control applications of single-axis stepper motors;
2. Number of control axes: Single axis;
3. Chinese dot-matrix LCD display ( 128×64 dot matrix) and 21- key membrane switch;
4. Coordinate parameters support both relative and absolute coordinates;
5. Uniquely offers both immediate and register addressing instructions;
6. Provides operational instructions, enabling complex control;
7. 16 general-purpose input points ( including two hardware limit points ) and 8 output points, enabling various complex logic and point control;
8. Two simple and convenient programming methods: keyboard programming and host computer programming;
9. More than 50 instructions form a complete instruction space, helping you to complete any function.
Performance Specifications: 1. Output pulse frequency: 1 ~ 100KHz/ axis; 2. Maximum stepper motor speed control up to 5000 rpm ; 3. 12KB user program space, 704 user instruction programs; 4. 4KB user parameter storage space, 1024 parameters, parameter allowable range: ±999999999 .
Electrical characteristics: 1. Operating power supply: DC 24V ; 2. Input detection port: 24V switch signal ( 16 channels low level active); 3. Output control port: 150mA/24V (8 channels normally open ) .
