When choosing the price of integrated wastewater treatment equipment, we need to consider whether the equipment can solve our specific problems. If we only consider the price and purchase inferior equipment, the wastewater treatment will not achieve the desired results, and it's not worthwhile.
Installation of integrated wastewater treatment equipment:
First, we need to place the integrated wastewater treatment equipment on a flat surface. Simultaneously, we need to prepare a concrete foundation based on the shape of the equipment. The foundation must be level and horizontal. If the wastewater treatment equipment is to be buried, the foundation must be less than or equal to the height of the equipment, ensuring no water accumulation during rainy weather. To prevent the floating treatment equipment from floating, we must pre-embed a foundation and floating rings.
During installation, preparations must be made according to the installation diagram of the integrated wastewater treatment equipment, and the direction and location of the cabinet should be indicated. Everyone must remain vigilant and ensure proper spacing between equipment and connection to pipes. After the integrated wastewater treatment equipment is in place, it must be connected to the anti-floating ring on the base.
Pour the wastewater into the integrated wastewater treatment equipment and check the pipes for leaks. If conditions are good, add water to a depth of 30-50 cm and cover the integrated wastewater treatment equipment cabinet until it is parallel to the ground.
The control panel of the electrical control cabinet needs to be connected to the water pump. The electrical control cabinet is then connected to the power supply. During connection, we need to check if the motor and fan are rotating normally. If not, they can be rotated manually.
