To make it easy for everyone to complete the debugging of CoolDrive S7
The editor specially asked the technical engineers of Qingneng Dechuang to prepare
CoolDrive S7 Servo Tuning Course
The course will use S7 (EtherCAT version, standard) as an example.
Combined with the debugging software DriveMaster
Explaining how to perform basic debugging
DriveMaster servo debugging software provides users with a convenient way to set servo parameters—the "Motor Configuration Wizard" function. Users can follow the wizard's steps to set servo parameters and test run the motor.
In this episode, we come to the finale of the "Setting up the Motor Configuration Wizard".
CoolDrive S7 Tuning Course
☑ 01 Position following settings, speed and current amplitude settings
☑ 02 Motor Phase Finding
☑ 03 Motor Trial Run
Without further ado
Let's get into this episode's content first—
01. Position following setting, speed and current amplitude setting
The seventh to ninth steps of the wizard function are, in order, "Position Follow Setting", "Speed Limit Setting" and "Current Limit Setting".
02. Motor phase finding
"Motor phase finding" is the tenth step of the wizard function. The software offers two operation methods: "normal method" and "manual setting".
03. Motor trial run
The final step of the wizard function is "Motor Test Run". The software provides two test modes: "Forward" and "Reverse" to check whether the motor is operating normally.
OK
Up to this episode
Video tutorials on the "Motor Configuration Wizard"
That concludes the sharing.
If you have other topics you'd like to learn...
Feel free to leave us a message
Maybe next time
Then it appeared.
