□ Pulse output type: □ NPN output □ PNP output
□ NPN output with internal pull-up (4.7KΩ)
□RS485 communication type
□ Voltage Output Type: □ 0-5VDC □ 0-10VDC
□ Current output type: 4-20mA
Power supply: □DC5~24V □DC12~24V
Measuring range: □0-30m/s □0-60m/s
Load capacity: □ Other □ <500Ω □ >2kΩ
Maximum power consumption (DC24V): Pulse type MAX≤200mW;
Voltage type MAX≤300mW;
Current type MAX ≤ 700mW;
Starting wind speed: 0.4~0.8m/s; Weight: ≤0.5Kg
This three-cup anemometer is an anemometer independently developed and manufactured by our company. It consists of a housing, anemometer cups, and a circuit module, and integrates a photoelectric conversion mechanism, an industrial microcomputer processor, a standard current generator, and a current driver.
The sensor housing and wind cup are made of aluminum alloy using a special die-casting process, resulting in extremely small dimensional tolerances and high surface precision. The internal circuitry is fully protected, giving the entire sensor high strength, weather resistance, corrosion resistance, and water resistance. The cable connector is a plug with excellent corrosion and erosion resistance, ensuring long-term instrument use. Furthermore, the accompanying instruction manual for the wind speed sensor's internal imported bearing system ensures accurate wind speed data acquisition.
The circuit PCB uses high-grade materials to ensure parameter stability and electrical performance quality; the electronic components all use imported industrial-grade chips, which gives the whole system a highly reliable ability to resist electromagnetic interference and ensure that the host can work normally within the range of -20℃ to +50℃ and humidity of 35% to 85% (non-condensing).
