spoke-type pressure sensor
The spoke-type pressure sensor utilizes the elasticity of spokes, featuring a low profile, high resistance to eccentricity, high accuracy, and high strength. It offers greater ease of installation in complex industrial environments and can meet various customer needs for both tensile and compressive force measurements. Spoke-type pressure sensors are widely used in electronic scales such as hopper scales, truck scales, and rail scales, performing force analysis and measurement in various industrial weighing systems.
Features of spoke-type pressure sensors
The spoke-type pressure sensor uses imported foil strain gauges and elastic elements as its sensing elements;
The structure is compact and robust, small in size, easy to install, and has good stability;
It employs a frequency cutoff interference design, resulting in strong anti-interference capabilities; it also boasts high sensitivity and accurate measurements.
The cross-shear beam structure exhibits excellent natural linearity.
It has strong resistance to eccentric loads, high precision, low profile, and is easy and stable to install.
Application Cases of Spoke-Type Pressure Sensors
Spoke-type pressure sensors are widely used in electronic scales such as hopper scales, truck scales, and rail scales for force analysis and measurement in various industrial weighing systems. Standard signal output is selectable: 4–20mA, 0–10V, or 0–5V.
Performance parameters of spoke-type pressure sensor:
Load-bearing methods: tension type, compression type
Pressure ranges: 1, 2, 3, 5, 10, 20, 50, 100T
Output signal: Zero-position output ≤ ±1mV
Power supply: 9VDC
Output sensitivity: 2.0 ± 0.002 mV/V
Accuracy: ±0.05%FS
Ambient temperature: -40～85℃
Overload capacity: 200%FS
Stability performance: ±0.1%FS/year
Temperature drift: ±0.01%FS/℃
Overall material: elastic steel
Protection rating: IP65
Insulation resistance: ≥3000MΩ
Other points to note:
Please check that the packaging is intact and verify that the sensor model and specifications match the product you purchased;
Confirm that the power supply voltage is correct and that the positive and negative terminals of the power supply correspond to the positive and negative terminals of the product.
Avoid installing in locations prone to impact to prevent product damage;
Users should not disassemble the product themselves to avoid damaging it.
Sensors and wires should be kept away from high voltage and areas with severe electromagnetic interference;
Please keep the certificate of conformity safe and return it along with the product when it is repaired.
