1. The temperature should be moderate.
Avoid excessively low or high temperatures. If the UPS battery is used in an environment above the specified operating temperature (above 35°C), the battery capacity will continuously decrease, meaning the power supply time will not be as long as usual. Charging the equipment at such temperatures will cause even greater damage to the battery. Even storing batteries in relatively hot environments will inevitably cause some damage to their quality. Therefore, maintaining a suitable operating temperature is a good way to extend the lifespan of lithium batteries.
If you use lithium batteries in low-temperature environments, i.e., below 4C, you will also find that the battery life of the UPS is reduced, and some original lithium batteries in mobile phones may not even charge in low-temperature environments. But don't worry too much, this is only a temporary situation. Unlike the use in high-temperature environments, once the temperature rises, the molecules in the battery are heated and immediately recover their previous capacity.
2. The frequency of use must be appropriate.
To maximize the performance of lithium iron phosphate batteries, they should be used frequently to keep the electrons within the battery constantly flowing. If you don't use the lithium battery often, remember to complete a full charging cycle once a month and perform a capacity calibration, i.e., a deep discharge and deep charge.
3. Prevent mixing with metal bodies
Do not store batteries with metal objects, as metal objects may come into contact with the positive and negative terminals of the battery, causing a short circuit, damaging the battery, or even posing a danger.
4. The surrounding environment should be suitable.
If UPS batteries are used in environments exceeding the specified operating temperature (above 35°C), the battery capacity will continuously decrease, meaning the power supply time will not be as long as usual. Charging equipment at such temperatures will further damage the batteries. Even storing batteries in relatively hot environments will inevitably cause some damage to their quality. Therefore, maintaining a suitable operating temperature is a good way to extend the lifespan of lithium batteries.
If lithium-ion batteries are used in low-temperature environments, i.e., below 4C, you will also find that the battery life is reduced, and some original lithium batteries in mobile phones may not even charge in low-temperature environments. But don't worry too much, this is only a temporary situation. Unlike use in high-temperature environments, once the temperature rises, the molecules in the battery are heated and immediately recover their previous capacity.
To maximize the performance of lithium iron phosphate batteries, they should be used frequently to keep the electrons inside constantly flowing. If you don't use the lithium battery often, remember to complete a full charging cycle once a month and perform a capacity calibration, i.e., a deep discharge and deep charge.
Do not store batteries with metal objects, as metal objects may come into contact with the positive and negative terminals of the battery, causing a short circuit, damaging the battery, or even posing a danger.
Lithium iron phosphate batteries should be stored in a clean, dry, and well-ventilated environment, and should be kept away from corrosive substances, fire, and heat sources.
We use batteries and are concerned about their lifespan. To measure how long a rechargeable battery can actually last, the concept of cycle life is defined. Theoretical user experiences vary greatly, and experiments under different conditions are not comparable. To make comparisons, the meaning of cycle life must be standardized. We can usually obtain the theoretical lifespan of a lithium iron phosphate battery from its label, but there is generally a gap between the theoretical and actual lifespan. Good usage habits are essential to extending the battery's lifespan. Only in this way can lithium iron phosphate batteries be properly maintained.
