1. Lighting fixture layer design
a. Select the main evacuation exits and evacuation routes based on the floor plan, and design emergency signage and lighting fixtures according to the fire evacuation guidance system design specifications and local design standards;
b. Design the density and location distribution of emergency lighting fixtures according to the project's emergency lighting illuminance requirements;
c. Circuits should be divided according to the planar fire compartments; multiple fire compartments should not share a single circuit. Each vertical evacuation route and its extension area can be considered as an independent fire compartment, and vertical lighting should be used.
d. The number of single-circuit emergency lights should not exceed 32.
2. System Topology Diagram
The A100 fire emergency lighting and evacuation guidance system topology diagram is used to illustrate the system structure of the entire project. From it, you can read the connection relationship between all layers of the A100 system and the wiring from the emergency lighting controller to the dedicated emergency power supply for the fire emergency lights. It can clearly show the distribution location of the emergency lighting power distribution device and the quantity of various emergency lights.
