Create a new project file (Ctrl+N)
Open the project file (Ctrl+O)
Save project file (Ctrl+S)
Print (Ctrl+P)
Undo Trapez diagram: Cut/Paste (Ctrl+Z)
Delete selected content and save to clipboard (Ctrl+X)
Copy (Ctrl+C)
Paste (Ctrl+V)
Show/hide project file data Alt+0
Soft component detection Alt+1
Jump to Alt+2
Partial execution Alt+3
Step-by-step execution Alt+4
Remote operation Alt+6
Project data list Alt+7
Network parameter settings Alt+8
Close the window (Ctrl+F4)
Move to the window below (Ctrl+F6)
End application Alt+F4
Insert column Ctrl+Ins
Delete column: Ctrl+Del
Switch to the current (editing) program using F4.
Switch between all current (editing) programs (Alt+Ctrl+F4)
Write (Running Status) Shift+F4
Show/hide comments (Ctrl+F5)
Switch to monitor mode / Start monitoring F3
Switch to monitor (write mode) Shift+F3
Start monitoring (write mode) Shift+F3
Move the cursor while inputting a ladder diagram . Ctrl+Cursorkey
Show the dialogue .
Stop monitoring Alt+F3
Insert line Shift+Ins
Delete line Shift+Del
Write mode F2
Read mode Shift+F2
Show/hide description (Ctrl+F7)
Show/hide comments Ctrl+F8
Show/Hide device models Alt+Ctrl+F6
Start monitoring . Ctrl+F3
Stop monitoring . Alt+Ctrl+F3
Switching between ladder diagrams and instruction lists: Alt+F1
Locate contacts or relays
coil Alt+Ctrl+F7
SFC and Ladder Diagram Conversion: Ctrl+J
Insert line Shift+Ins
Delete line Shift+Del
Insert column Ctrl+Ins
Delete column: Ctrl+Del
Switch to write mode F2
Switch to read mode Shift+F2
Switch to monitor mode / Start monitoring F3
Switch to monitor (write mode) Shift+F3
Start monitoring (write mode) Shift+F3
Stop monitoring Alt+F3
Start monitoring all windows . Ctrl+F3
Stop monitoring all windows . Alt+Ctrl+F3
Switch to the current editing module (F4)
Show/hide device name Alt+Ctrl+F6
Switch between all current editing programs (Alt+Ctrl+F4)
Show/hide comments (Ctrl+F5)
Move the SFC cursor using Ctrl+Cursorkey
Find contacts or coils using Alt+Ctrl+F7
The program indicates (MELSAP-L) Alt+Ctrl+F8
SFC (symbol)
---------------------------------------------------------------------------------------------------------------
Single Step F5
Block start step (with END check) F6
Block start step (no END check) Shift+F6
Jump to F8
END step F7
Dummy Step Shift+F5
Transmit F5
Select branch F6
Simultaneously, branch F7
Select F8 in the center.
Simultaneously concentrate F9
Vertical line Shift+F9
The transformation property is usually set to Ctrl+1.
Change properties to store coil (Ctrl+2)
Change attribute to save operation (Ctrl+3)
(No transmission check)
Change attribute to save operation (Ctrl+4)
(Transmission check included)
Change the property to reset (Ctrl+5)
Vertical line (edit line) Alt+F5
Select the branch (edit line) Alt+F7
Simultaneously, branch (edit line) Alt+F8
Select the central (edit line) Alt+F9
Simultaneously press Alt+F10 (edit line)
Delete line (Ctrl+F9)
Block pause F5
Step pause F6
Block run F8
Step to run F7
Step-by-step F9
Run all blocks F10
Force block stop Shift+F8
Force step stop Shift+F7
Force reset stop Shift+F9
ST Editing Screen
---------------------------------------------------------------------------------------------------------------
Move to the first line (Ctrl+Home)
Move to the last line (Ctrl+End)
Select all text (Ctrl+A)
Redo/Undo (Ctrl+Y)
Position yourself within the specified line using Ctrl+J
To search for content, use Ctrl+F.
When searching, use F5 for alternative search.
When searching, use Shift+F5 to search for candidate items.
Replace text column with Ctrl+H
To set/remove bookmarks (Ctrl+F7)
Use F7 to search for bookmarks in the next candidate list.
To search for bookmarks, use Shift+F7.
Convert the program in the editing process using F4.
Convert all programs in the editor using Alt+Ctrl+F4
Add fuel during RUN (Shift+F4)
To start monitoring all windows, press Ctrl+F3.
Stop controlling all windows (Alt+Ctrl+F3)
Start controlling F3
Stop temporary control Alt+F3
Display the label selection screen (F11)
Display the function selection dialog box (Shift+F11)
Switch between vertically and horizontally split windows of a window that is currently locked (ST) using Shift+Tab.
