1) Single-stage transmission, transmission ratio generally 9-87B(X)W(L)D10-23-0.55 Explanation: B(X)—B series cycloidal pinwheel reducer; X series cycloidal pinwheel reducer. W(L)—W for horizontal installation; L for vertical installation. D(B)—D for Y series ordinary motor; B for YB series explosion-proof motor. 10—Frame size is 10. 23—Reduction ratio is 23. 0.55—Motor power is 0.55kw.
2) Two-stage transmission, transmission ratio generally 121-7569B(X)W(L)ED195-475-16 Explanation: B(X)—B series cycloidal pinwheel reducer; X series cycloidal pinwheel reducer. W(L)—W for horizontal installation; L for vertical installation. E—E for two-stage transmission. D(B)—D for Y series ordinary motor; B for YB series explosion-proof motor. 195—Frame size is 195. 475—Reduction ratio is 475. 16—Motor power is 16kW. Applications: Cycloidal pinwheel reducers utilize cycloidal pin gear meshing and planetary transmission principles, hence they are also commonly called planetary cycloidal reducers. They are widely used in industries such as petroleum, environmental protection, chemical, cement, conveying, textile, pharmaceutical, food, printing, hoisting, mining, metallurgy, construction, and power generation as drive or speed reduction devices. These reducers are available in horizontal, vertical, dual-shaft, and direct-drive configurations. Their unique, smooth structure can replace ordinary cylindrical gear reducers and worm gear reducers in many situations. Therefore, planetary cycloidal pinwheel reducers are widely used in various industries and fields and are generally welcomed by users.
Usage Conditions 1: Cycloidal pinwheel reducers are permitted for continuous operation and can rotate in both forward and reverse directions. Some models of cycloidal pinwheel reducers only allow rotation in one direction.
2. The rated speed of the input shaft is 1500 rpm. When the input power is greater than 18.5 kW, it is recommended to use a 6-pole motor with a speed of 960 rpm.
3. The working position of a horizontally mounted cycloidal pinwheel reducer is always horizontal. The maximum horizontal tilt angle during installation is generally less than 15°. If it exceeds 15°, other measures should be taken to ensure adequate lubrication and prevent oil leakage.
4. The output shaft of the cycloidal pinwheel reducer cannot be subjected to large axial and radial forces. Other measures must be taken when there are large axial and radial forces.
