Many people think that installing a printing press system is a difficult skill, but that's not the case. This article will teach you a quick and easy way to install a Heidelberg computer system, explained step-by-step. Please see the details below:
1. Obtain the version number from the computer startup screen of the printing press.
2. Obtain the host computer version from the text label on the printing press host: e.g., 00 783 0182
3. Combining the printing press system version number and the host version number, search for the corresponding printing press computer system backup GHOST image file from the printing press maintenance data, as shown in the figure: SW35.2-for007830182-HDD1A.GHO, SW35.2-for007830182-HDD2.GHO. These two files are the GHOST files for hard drives 1 and 2, respectively. Restore them to the prepared blank hard drives 1 and 2 (label the hard drives 1 and 2 respectively).
IV. The restoration process is omitted (it is the same as the installation method of a regular computer system. If you are not good at installing a computer system, you can ask a regular computer system installer to do it for you). The hard drive contents after the files are restored contain all the functions and files of the printing press, and there is no need to install any other programs.
5. Insert hard drives 1 and 2 back into their original positions into the computer host, and turn on the main power of the printing press to operate normally.
