The selection of a synchronous belt linear module is crucial to its proper functioning. Selection must be based on specific usage requirements and conditions. Therefore, we have compiled a list of factors to consider when selecting a synchronous belt linear module for your reference:
I. Operating conditions for synchronous belt linear modules;
a. Load center of gravity location. Is the center of gravity at the center point of the linear module or off-center?
b. Operating conditions. These include linear module lead, operating speed, acceleration/deceleration, and cycle time.
c. Operating environment. (Is it a high-temperature environment? What is the magnitude of vibration? Does it involve oil, water, or corrosive liquids?)
d. Effective stroke. The effective stroke is less than the length of the linear module.
e. Spatial limitations. This includes the width, height, and length of the space.
f. Installation method. Is it horizontal, vertical, or side-mounted?
II. Precision requirements for synchronous belt linear modules;
a. Position accuracy.
b. Repeatability: Perform 30 positioning actions in the specified direction, and use 3 times the standard deviation of the target position as the repeatability.
c. Walking parallelism.
III. Application Forms of Synchronous Belt Linear Modules;
a) Single axis
b. Two axes
c. Multi-axis
d. Special combinations
IV. Selection of synchronous belt linear module motors;
a) Servo motors: High control precision, large acceleration, and overload capacity; however, they are expensive.
b. Stepper motor: has lower control precision and smaller acceleration, generally does not have overload capacity, and is inexpensive.
c. Does it have brakes (built-in or external)?
V. Load calculation for synchronous belt linear module motor;
a. Maximum speed
b. Motor resolution
c. Motor torque calculation
VI. Operational Analysis of Synchronous Belt Linear Module;
a. Acceleration
b. Actual Operation Mode
VII. Selection of related accessories (limit switches, adapter plates, motor mounting plates, telescopic sleeves, cable protection pipes);
8. Final confirmation of the selection of synchronous belt linear modules.
a. Reconfirm usage conditions
b. Price and delivery time
c. Additional processing
d. Special requirements
The above are the factors to consider when selecting a synchronous belt linear module. Hopefully, this information will be helpful!
This article is from: Linear Module http://www.shysz8.com/
