Overview Blowout preventer (BOP) control devices, as well as well control equipment, are of paramount importance in terms of functionality, reliability, and safety. BOP control devices are among the products regulated by the state under the industrial product production license system. Products must undergo rigorous quality system audits and product quality inspections by the national quality supervision and inspection department, and a production license must be issued before they can be manufactured and sold. BOP control devices are one of the products covered by this factory's ISO9001 quality assurance system. Therefore, the factory places great emphasis on product quality control. The factory's senior technical personnel, operators, and inspectors maintain strict quality requirements and continuously improve their testing skills. Based on these stringent requirements, the Turing Kaiwu BOP pressure testing control system provides the necessary software environment for technology, inspection, and production, ensuring product quality. System Composition This system consists of two parts: "Operating Environment" and "Report Management." The "Operating Environment" is mainly responsible for data acquisition and control, while "Report Management" manages and queries historical reports. User Interface The test process is divided into several parts: pressure increase, pressure stabilization, pressure holding, and pressure release. The status and faults of the unloading valve and electric pump can be observed on the test interface. Parameter settings [b]Report generation Excel report[/b] Management of test reports