To help everyone use our products better, ZS Intelligent Control is launching a series of " Servo Tutorial Videos , " which mainly cover five aspects of servo systems: terminal instructions, parameter settings, jog operation , monitoring mode, and initialization/factory reset.
Technicians demonstrate with hands-on demonstrations and explanations, the steps are clear and easy to understand .
This episode features a tutorial video on using the G2 series servo motors (previous episode: Tutorial video on using the K1 series servo motors ).
Friendly reminder: Viewing in landscape mode provides a better viewing experience.
01. Instructional video for G2 terminal
First, let our technicians explain the servo panel terminal specifications. Familiarity with the panel terminals will facilitate learning other operations later.
02. G2 Parameter Modification Operation Video
Operating steps:
Power on
Press the M key to enter the Pn-00 interface, then press the OK key.
Press the up button to enter the P0-01 interface, then press the OK button.
After consulting the motor compatibility table in the user manual, we entered the correct motor code.
Here we enter 12 , press the OK button, and "done" appears , indicating that the motor code parameter setting is complete.
03. G2 Jog Tutorial Video
Operating steps:
Power on
Press the M key until the dn-00 screen appears .
Press the up key until dn-01
Press the OK button to enter Jog mode .
Press the M key to enable the servo and start the rotation.
The motor speed can be adjusted by pressing the up and down keys.
The motor rotation direction can be adjusted by pressing the displacement keys.
04. G2 Monitoring Mode Tutorial Video
Operating steps:
Upon power-on, a monitoring interface will appear, which defaults to monitoring motor speed.
Press the M key to enter the Fn-00 interface .
Use the up and down keys to select the desired monitoring number. Refer to the user manual for details. Here, we will use Fn-00 as an example.
Press the confirmation button to monitor the motor speed.
05. G2 Initialization Setup Tutorial Video
Operating steps:
1. Power on
2. Press the M key until you reach the dn-00 screen.
3. Press the up key until dn-02
4. Press and hold the confirmation button until "done" appears , indicating that initialization is complete.
That concludes this G2 tutorial video. Thank you for watching. If you have any further needs, please let us know in the comments section, and we will address them as soon as possible.
